Microbiology Laboratory

Microbiology laboratory
Microbiology services
Pharmaceutical microbiology laboratory service
Industrial microbiology laboratory service
Food microbiology
Water microbiology
Air sampling
General microbiology laboratory testing

Validation Labs Inc., A full service Contract Laboratory provides cost effective and fast Microbiology Laboratory Testing, Analytical Laboratory Testing, and Bioanalytical Laboratory Testing Services for Pharmaceutical, Food, and Cosmetic Industry.

Our Microbiology Lab provides state of the art bacterial identification. VLI's Microbiology Department is capable of serological and subspecies identification. Validation Laboratories Inc Microbiology lab uses RiboPrinting technique for bacterial and microbial identification. We also provide contamination and source contamination identification.

VLI's Microbiology Lab also provides a full array of microbiological testing, identification of fungi, yeast, and mold.

Home

Analytical Laboratory Services

Microbiology Laboratory Services

Cosmetics Laboratory Services

	Engineering & Facility Design Services	Method Development and Validation Services	Validation, Consulting & Audit Services

Validation Laboratories Inc		Validation laboratories Inc Comprehensive Contract Lab Microbiology Laboratory Department 1560 Commerce Street, Unit F, Corona, CA 92880 Email: testing@validationinc.com Tel: 866-539-1536 Fax: 717-427-1727		Full Service Contract Lab and Microbiology Laboratory Testing Comprehensive Contract Lab Services, Cost Effective, Extensive Capacity and Expertise, Highly Experienced and Knowledgeable Personnel, and Guaranteed Service.

Validation Laboratories Inc. is a provider of Microbiology Laboratory Testing for the Pharmaceutical, Personal Care, Cosmetics, Food , Disinfectant and many more industries.

Microbiology Laboratory Services

State of the Art Microbial Identification Via RiboPrinter: Identification of Microbiological Agents and Contamination Source Determination
Genetic Identification of Bacteria Via RiboPrinter Contamination Study Determination Microbiological Contamination Source Investigation Microbial Identification Bacterial Sub-Species Identification

Microbial Identification Sterility Testing USP <71> Direct Inoculation Direct Immersion Membrane Filtration Microbial Limits Bioburden Analysis Water Testing Microbial Identification Bacterial Endotoxin Test Method Development and Validation Minimum Lethal Concentration Bioburden Test LAL Bacterial Endotoxin Test Fungal, Yeast Mold Identification Food Microbiology	Microbial Limit Test USP <61> Microbial Limit Testing for Cosmetics Total Aerobic Microbial Count Salmonella & Escherichia Coli Staphylococcus Aureus & Pseudomonas Aeruginosa Total Combined Mold & Yeast AET- Antimicrobial Effectiveness Testing USP <51> Or Preservative Effectiveness Testing Identification of Bacteria by RiboPrinter Escherichia Coli Staphylococcus Aureus Pseudomonas Aeruginosa Candida Albicans Aspergillus Niger Sterile - assay, impurities, pH, microbial, and sterility as well as process validation support for water systems.

General Microbiology Testing
Sterile - assay, impurities, pH, microbial, and sterility as well as process validation support for water systems. Microbial ID Sterility Testing Microbial Limits Bioburden Analysis Water Testing Microbial Identification Bacterial Endotoxin Test Method Development and Validation Minimum Lethal Concentration Identification of Bacteria – Liquid Sample Identification of Fungi – Liquid Sample Microscopic Examination of Unknown Substances Minimal Inhibitory Concentration (MIC): Test Compound At Three Dose Levels, One Organism Aerobic Plate Count Anaerobic Plate Count Fungal Plate Count Acid-Fast Stain for Identification of Mycobacterium Mycobacterium Culture and Enumeration Acid-Fast Stain for Identification of Mycobacterium + Mycobacterium Culture and Enumeration Minimum Biocide Concentration (MBC) for Mycobacterium: Three Time Points, One Organism Nitrifying Bacteria Count Endotoxin Evaluation

General Microbiology Testing

Sterile - assay, impurities, pH, microbial, and sterility as well as process validation support for water systems.
Microbial ID
Sterility Testing
Microbial Limits
Bioburden Analysis
Water Testing
Microbial Identification
Bacterial Endotoxin Test
Method Development and Validation
Minimum Lethal Concentration
Identification of Bacteria – Liquid Sample
Identification of Fungi – Liquid Sample
Microscopic Examination of Unknown Substances
Minimal Inhibitory Concentration (MIC): Test Compound At Three Dose Levels, One Organism
Aerobic Plate Count
Anaerobic Plate Count
Fungal Plate Count
Acid-Fast Stain for Identification of Mycobacterium
Mycobacterium Culture and Enumeration
Acid-Fast Stain for Identification of Mycobacterium + Mycobacterium Culture and Enumeration
Minimum Biocide Concentration (MBC) for Mycobacterium: Three Time Points, One Organism
Nitrifying Bacteria Count
Endotoxin Evaluation

Food Microbiology Testing
Aerobic Plate Count – Total bacteria Yeast and Mold Count Coliforms – Total (MPN) Coliforms – Fecal (MPN) General Food Pathogen Screen E. coli E. coli O157:H7 Listeria monocytogenes Salmonella sp. Shigella Clostridium perfringens Staphylococcus aureus Lactobacillus

Water Microbiology
Heterotrophic Plate Count Total Aerobic Viable Count in Low Count or Treated Process Water (membrane filtration) Pseudomonas aeruginosa (membrane filtration) Total Coliform (MPN) Fecal Coliform (MPN) Total Coliform (membrane filtration) Fecal Coliform (membrane filtration) Fecal Streptococci (membrane filtration) Iron Bacteria (Sphaerotilus, Gallionella, Crenothrix) Microscopic Evaluation (ASTM D932) Legionella pneumophila Quantitative and Confirmation by Direct Fluorescent Antibody (DFA) Desulfovibrio desulfuricans Count and Presumptive Identification Total Algae Count by Microscopic Evaluation or Culture

Water Microbiology

Heterotrophic Plate Count
Total Aerobic Viable Count in Low Count or Treated Process Water (membrane filtration)
Pseudomonas aeruginosa (membrane filtration)
Total Coliform (MPN)
Fecal Coliform (MPN)
Total Coliform (membrane filtration)
Fecal Coliform (membrane filtration)
Fecal Streptococci (membrane filtration)
Iron Bacteria (Sphaerotilus, Gallionella, Crenothrix) Microscopic Evaluation (ASTM D932)
Legionella pneumophila Quantitative and Confirmation by Direct Fluorescent Antibody (DFA)
Desulfovibrio desulfuricans Count and Presumptive Identification
Total Algae Count by Microscopic Evaluation or Culture

Air Sampling and Air Microbiology
Air Sampling Sampling On-Site and Door-to-Door Bacterial Count (Colony Forming Units/Cubic Meter) Fungal Count (Colony Forming Units/Cubic Meter)

ASTM Microbiology Testing
Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation-Fungi Resistance: ASTM C739 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings: ASTM C1338 Standard Test Methods for Mildew (Fungus) Resistance of Paper and Paperboard: ASTM Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms: ASTM D2574D2020 Standard Test Method for Resistance to Mold on the Surface of Interior Coatings in an Environmental Chamber: ASTM D3273 Standard Test Method for Evaluating the Bacteria Resistance of Water-Dilutable Metal Working Fluids: ASTM D3946 Standard Test Method for Ability of Adhesive Films to Support or Resist the Growth of Fungi: ASTM D4300 Standard Test Methods Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi: ASTM D4783 Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay: Potato Dextrose or Malt Agar and Nutrient-Salts Agar ASTM D5590 Standard Test Method for Preservatives in Water Containing Cosmetics: ASTM E640 Standard Test Method for Efficacy of Microbicides Used in Cooling Systems (Includes Six Biocide Levels and Two Time Points): ASTM E645 Standard Method for Evaluation of Antimicrobial Agents in Aqueous Metal Working Fluids: ASTM E686 Mycobacteria Challenge Test for Metal Working Fluids (15% disc. for 11+ samples) Standard Test Method for Evaluation of Antimicrobials in Liquid Fuels Boiling below 390^oC: ASTM E1259 Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids: ASTM E 1687 Standard Test Method for Determining the Antimicrobial Activity of Immobilized Antimicrobial Agents Under Dynamic Contact Conditions: ASTM E 2149 Standard Test Method for Determining the Activity of Incorporated Antimicrobial Agents in Polymeric or Hydrophobic Materials: ASTM E2180 Antimicrobial Products-Test for Antimicrobial Activity and Efficacy, JIS Z 2801 (Japanese Industrial Standard) Antibacterial Activity Assessment of Textile Materials: Parallel Streak Method, AATCC 147 USP 51 Antimicrobial Effectiveness Testing Antibacterial Finishes on Textile Materials: Assessment of, AATCC 100 Standard Practice for Determining Algal Resistance of Plastic Films: ASTM G29 Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance: ASTM E2275

ASTM Microbiology Testing

Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation-Fungi Resistance: ASTM C739
Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings: ASTM C1338
Standard Test Methods for Mildew (Fungus) Resistance of Paper and Paperboard: ASTM
Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms: ASTM D2574D2020
Standard Test Method for Resistance to Mold on the Surface of Interior Coatings in an Environmental Chamber: ASTM D3273
Standard Test Method for Evaluating the Bacteria Resistance of Water-Dilutable Metal Working Fluids: ASTM D3946
Standard Test Method for Ability of Adhesive Films to Support or Resist the Growth of Fungi: ASTM D4300
Standard Test Methods Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi: ASTM D4783
Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay: Potato Dextrose or Malt Agar and Nutrient-Salts Agar ASTM D5590
Standard Test Method for Preservatives in Water Containing Cosmetics: ASTM E640
Standard Test Method for Efficacy of Microbicides Used in Cooling Systems (Includes Six Biocide Levels and Two Time Points): ASTM E645
Standard Method for Evaluation of Antimicrobial Agents in Aqueous Metal Working Fluids: ASTM E686
Mycobacteria Challenge Test for Metal Working Fluids (15% disc. for 11+ samples)
Standard Test Method for Evaluation of Antimicrobials in Liquid Fuels Boiling below 390^oC: ASTM E1259
Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids: ASTM E 1687
Standard Test Method for Determining the Antimicrobial Activity of Immobilized Antimicrobial Agents Under Dynamic Contact Conditions: ASTM E 2149
Standard Test Method for Determining the Activity of Incorporated Antimicrobial Agents in Polymeric or Hydrophobic Materials: ASTM E2180
Antimicrobial Products-Test for Antimicrobial Activity and Efficacy, JIS Z 2801 (Japanese Industrial Standard)
Antibacterial Activity Assessment of Textile Materials: Parallel Streak Method, AATCC 147
USP 51 Antimicrobial Effectiveness Testing
Antibacterial Finishes on Textile Materials: Assessment of, AATCC 100
Standard Practice for Determining Algal Resistance of Plastic Films: ASTM G29
Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance: ASTM E2275

Please contact us for pricing for Microbiology Lab Services, Chemical Testing Services , and Contract laboratory Services. We provide cost effective and rapid Microbiology Laboratory Testing, Microbiology Validation, Microbiology Development, Microbiology Laboratory Services, Chemical Analysis, Assay Development, and Assay Validation.

	Sample Submission Form	Human Resources	Company Brochure	Useful Links	Microbiology Laboratory Services

Validation Laboratories Inc
1560 Commerce Street, Unit F, Corona, CA 92880
Tel: 866-539-1536, Fax: 717-427-1727
Email: testing@validationinc.com

Shipping Address:
8018 E Santa Ana Canyon Rd
100-150
Anaheim Hills, Ca 92808